Elevator® Pedestal Assembly

A High Elevation Roof Deck Solution

Hanover® is pleased to provide an elevated pedestal system for those projects which require paver heights above 2" and up to 24". The new Elevator® System has features included that greatly add to the performance, ease and stability of the installation.

Top Plate
The top plate is supplied with pads that are an integral part of the top. These pads will quiet and secure the paver to the pedestal. Rigid-to-rigid (pedestal-to-paver) hard surfaces can create noise and paver movement when pedestrians walk across. The pads will eliminate both conditions.

Coupler
As part of the Elevator® System, Hanover® can provide a Coupler to increase the paver height by 2 1/2" - 4". Bracing is required for elevations above 16" and up to 24". Hanover´s Coupler includes a circular flange with multiple holes, or eyelets, for ease of tie bracing. This ring of eyelets around the entire coupler, as well as the holes in the base, will enable the installer to securely fasten braces quickly and easily. (Request installation details for horizontal and cross bracing.)

Staybar™
Because bracing is required for elevations above 16" and up to 24" when using the Elevator® Pedestal System, Hanover® offers the StayBar™ which fits firmly between Elevator® bases to prevent movement of the assembly. StayBar™ provides adequate stabilization for higher elevated paver installations when used in conjunction with wire cross ties. Bracing should be achieved using a stainless steel 18 gauge wire, available through the MSC Catalog, part #31980188. Request from Hanover® installation guidelines for horizontal and cross bracing.

PLEASE NOTE: StayBars™ are required for applications 16" or above. The ratio of Staybars™ to elevators is approximately 2 Staybars™ to every Elevator®. Quantities of Staybars™ may be more or less depending on the project. Make sure you have enough Staybars™ to secure all connections.

Height Adjustments
When height adjustments are needed, Hanover's Elevator® System is unique because there is no cutting required or use of concrete filler. Heights can easily be adjusted and readjusted by rotating the base. There is no need to start over as with other types of pedestal systems.

Hanover´s Elevator® System can be used with all other Hanover® Pedestal Systems including the Compensator®. Hanover® Pedestal Systems are created to work together to accommodate a variety or roof slopes – even those with unusual slope-to-drain configurations.

New Leveling Shims
Use of Hanover´s new flexible rubber-like leveling shims will also provide installation stability for areas requiring finer, individual leveling. Leveling Shims are available in two thicknesses – 1/16" (black) and 1/8" (white).

Please Note: It is critical that Top units and Couplers have a minimum insertion of three threads of the unit to completely secure the pedestal and ensure stability.

Related Products

Related Data

Related Data