home | products | Halifax® Flagstone
Bookmark and Share



Halifax® Flagstone

Hanover´s NEW Halifax® Flagstone pavers create a natural effect at its best. Whether you are contemplating an inviting garden path or a quiet landscaped patio, Halifax® Flagstone is the perfect choice. A cleft surface and a wider joint style complete the rustic look.

These pavers simulate the contours of rustic stone on the tops and the sides. Because the top surface has high and low points, it is recommended that pavers be protected before tamping during installation. It is suggested that polymeric sand be used for joint filling. Several color blends are available which can be used seperately or combined.

Halifax® Flagstone Mixed

Hanover´s Halifax® Flagstone Mixed is made up of three pieces — a nominally sized 8" x 12", 8" x 8" and a 4" x 8". When randomly laid together, Halifax® Flagstone Mixed can create a variety of designs and effects. These bricks are excellent for creating curved walkways or bordering the Halifax® Flagstone Irregular. These three sizes are packaged together with equal amounts of each piece. All sizes are produced in a 3" thickness. Polymeric sand is recommended for join filling.



Halifax® Flagstone 12" x 12"

The 12" x 12" continues the rustic stone look of the other products in the Halifax® ; Flagstone line. Palletized separately, it can be laid alone or combined with the Halifax® Flagstone Mixed, allowing different designs of various scales. The 12" x 12" can also be used as a border for either the Halifax® Flagstone Mixed or Irregular

Halifax® Flagstone Irregular

This unique paver creates a perfect irregular flagstone appearance. Produced in a 3" thickness, each stone shape is made with one of twelve different score designs making the installation look completely natural. Polymeric sand should be used to fill the joints and scores. When these deep scores and joints are filled, the project has the appearance of individual stones.



Stocked Colors
Chocolate/Tan Blend, Gettysburg Gray, and South Mountain Sand

Pavers with profiled tops are most susceptible to harm from plate compactors. These pavers have high and low points molded into the surface, which prevent the equipment from riding flat and subject the high points to potential scuffs. However, even smooth, flat surfaces can be harmed with improper usage or the existence of debris on the plate. To help minimize the scuffing of the profiled surface, it is important to have adequate sand on the surface prior to tamping. Hanover® recommends the use of a plate tamper with a rubber mat attachment.

Before ordering make sure you have selected the correct proportion of 12" x 12" pieces according to the effect you wish to achieve. For ease of installation, it may be necessary to cut the 4" x 8" piece in half to fill spaces which the laying design created. Hand spacing of the half piece may be needed to maintain joint alignment.

Joints must be filled with polymeric sand which is specially formulated for the filling of wide joints when installing pavers. Unlike traditional sand, polymeric sand stays in place and remains stable; effectively resisting erosion caused by water, frost, wind, etc.


 download product literature
 download technical data from our Resource Center
   

Appian® Prest® Brick — Natural Finish

Several sizes of square and rectangular brick shapes, together with blended colors and antiqued top edges, allow the installation to give a "cobbled charm" to the project. more >>


Bullnose Coping

Hanover® Bullnose Coping has a specially rounded side, designed to act as an exposed edge when a hard corner may not be suitable. more >>

Classics™ Series

A stone-like Tudor® texture gives a rustic, natural finish to each brick. They can be used individually. or several shades blended together to create a very natural effect for the installation. more >>

Multisided Prest® Brick — Natural Finish

These shapes, ranging from a series of gentle arches to a variation of a rectangular brick with angled sides, create new multisided opportunities for the designer. Standard colors and a range of blends are available. more >>

Serengeti® Stone

Hanover's new Serengeti® Stone truly displays the rough and rugged characteristics of the Serengeti. more >>

Traditional® Prest® Brick — Natural Finish

Each brick is uniform in size, permitting easy installation of any paving pattern. The various sizes permit a break in pattern design when mixed or a tailored look when they are installed alone. more >>

Appian® Prest® Brick — Tumbled Finish

The worn stone effect will add a warm inviting entrance to any style building or home. This paving brick combines well with Hanover®'s Chapel Stone® Garden Walls, as part of a beautiful addition to any landscape. more >>


© 2001-2010 Hanover® Architectural Products. All rights reserved.  Use of this website signifies agreement to our terms of use. Sales of all products are subject to Hanover´s
Standard Terms and Conditions.
    Find Us on Facebook®