Hanover® RockCurb® has been designed to
provide an alternative to natural stone curbing. The stone is carefully graded and placed under a million pounds of
pressure, similar to the forces which form natural stone. Extremely dense concrete with high compressive strengths
gives the units low water absorption rates and salt resistant qualities. The units are consistent in size and many times
more durable than poured in place curbing. RockCurb® are available in Straight, Radius and Transition Sections. They
are easy to lift for repairs or for utility maintenance. If changes need to be made to the street or sidewalk, Hanover®
RockCurb® can be reconfigured and reinstalled.
RockCurb® Straight Section
Hanover® RockCurb® high density concrete
units are manufactured to 1/8" tolerances with the density and strength of natural stone. Straight sections are 36" long
and 6" thick. They are manufactured with either a 12" or 18" height. Tight production tolerances help to simplify the
installation procedure. An 1/8" joint is recommended to allow expansion through freeze-thaw cycles.
Hanover® RockCurb® is produced with an angled Battered Edge or a rounded Bullnose Edge. The 18" section is
available in both the Battered Edge and a Bullnose Edge. The 12" section is available in the Battered Edge Profile
and a limited number of external radii.
A specialized texture gives RockCurb® a stone-like appearance.
Although the stocked color is Limestone Gray, a range of colors and aggregate blends are offered to give a broader
selection of appearances. Custom aggregate blending is available when quantities permit.
RockCurb® Radius Section
RockCurb® Radius Sections can be used
when the installation incorporates curves. Gentle arches or circles can be accommodated by using a combination of
radii and straight sections. A complete selection of radii are available so that almost any municipal requirement can be
met.
Manufactured with either a 12" or 18" height, RockCurb® sections are available in two edges. The 18"
RockCurb® section is available in both the angled Battered Edge and the rounded Bullnose Edge. The 12" section is
available in the Battered Edge only and a limited number of external radii. Custom aggregate blending is available when
quantities permit.
RockCurb® Transition Section
Three special shapes are manufactured
to allow the transition from full height curbing to the appropriate level needed for an entrance or drive. The Left and Right
Transition Sections reduce the height, while the Center Transition Section provides the opening.
The Center
Transition Section can be used in multiples to allow any size driveway width. The Straight or Radius Sections can be
easily removed and replaced with Transition Sections to permit the transition to the level of the Center Transition
Section. One of the advantages of using Hanover® RockCurb® is the ability to reconfigure and accommodate
changes to the existing installation. RockCurb® is able to withstand vehicular traffic and is resistant to salt and other
deicing chemicals. Custom colors and aggregate blends can be ordered when quantities permit.
 download product literature
 download technical data from our Resource Center
 download our "Hanover® RockCurb® Brochure" PDF
download our "Radius and Profiles" PDF
download our "Cross Section Detail" PDF
download our "Drop Curb Detail" PDF
 view our i-drop product library
|
|
 |
|
| RELATED PRODUCTS / SERVICES |
 Hanover® Keystones
are an important design detail. The keystones are manufactured so that either side can be used as the front surface. One side has a large
bevel with a fine texture. The other side has a square edge, with no bevel and a smooth ground finish. more >> |
|
 Hanover's new line of masonry bridges the gap between concrete and natural stone. A unique manufacturing method truly reconstructs stone pieces into beautiful masonry. more >> |
|
 This new line of
exterior wall panels bridges the gap between concrete and natural stone. Unique manufacturing methods truly reconstruct
stone pieces into beautiful building panels more >> |
|
|
